Industrial 3D Printers | Adaptive Corp

Industrial 3D Printers

The Metal X

The World’s First Atomic Diffusion Additive Manufacturing (ADAM) Machine

The Metal X is the world’s first Atomic Diffusion Additive Manufacturing (ADAM) machine. It’s up to 10x less expensive than alternative metal additive manufacturing technologies – and up to a 100x less than traditional fabrication technologies like machining or casting. Affordable, reliable, and easy to use, the Metal X print system gives you everything you need to go from design to fully functional metal parts in under 24 hours.

View Specs

Facility Prep

View full product line brochure

Process: Atomic Diffusion Additive Manufacturing (ADAM)

Build Volume: 250 x 220 x 200 mm (9.8 x 8.7 x 7.1 in)

Weight: <114 kg (250 lbs)

Machine Footprint: 575 x 467 x 1120 mm (22.7 x 18.4 x 44.1)

Max Part Size: 208 x 183 x 167 x mm (8.2 x 7.2 x 6.6 in)

Max Part Mass: 10 kg

Part Density: >97%

Infill: Closed Cell Triangular Infill

Industrial-Grade 3D Printers

Industrial grade large-format printers deliver exceptional accuracy, reliability and repeatability. These printers are the go-to solution for manufacturing tool including jigs, jaws, tools, and fixtures.

Markforged X3

Industrial grade performance starts with an all-aluminum unibody enclosure built around an ultra flat gantry system. Add a machined aluminum stage with kinematic bed coupling, and a precision ground print platform. Then close the loop with software – instrumenting each machine with a full sensor suite including motor encoders and a calibration laser so accurate it can compensate for single digit changes in room temperature.

View Specs

Build Volume: 330 mm x 270 mm x 200 mm

Footprint: 584 mm x 483 mm x 914 mm

Z Layer Resolution: 50 μm

Machine Weight: 68 kg (150 lbs)

Media Cartridge: Plastic Composite Filament

Internal Part Geometry: Closed Cell, Triangular Infill, Closed Cell, Hexagonal Infill

Layer Height: 100 um default, 50 um minimum

Material Properties: UTS: 36 MPa (1.2x ABS); Flex Stiffness: 2.9 GPa (1.4x ABS)

Infill: Closed Cell Infill: Multiple geometries available

Markforged X5

For load-bearing applications requiring real strength, these parts make the grade. Print parts faster and cheaper than machining metal.

The Mark X5 leverages fiberglass reinforced thermoplastic to create parts 10x as strong as standard printing plastics. Easily upgradeable to the X7, the X5 is a laser assisted, durably built large format machine designed to reliably produce high strength parts in any environment at an affordable price point.

View Specs

Process: Continuous Fiber Reinforced Plastics

Build Volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in)

Weight: 48 kg (106 lbs)

Machine Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in)

Layer Height: 100 um default, 50 um minimum

Ultimate Tensile Strength: 590 MPa (19.0x ABS, 16.4x Onyx)

Max Flexural Stiffness: 22 GPa (10.7x ABS, 7.6x Onyx)

Markforged Mark X7

Exceptionally strong, supremely stiff, ultra lightweight, and incredibly versatile – X7 parts deliver performance without compromise.

The X7 prints industrial grade manufacturing jigs, jaws, tools and fixtures. Designed from the ground up to survive the production floor, environment and capable of printing parts stronger than machined aluminum for a fraction of the cost, the X7 delivers unparalleled surface finish, build size, and reliability.

View Specs

Process: Continuous Fiber Reinforced Plastics

Build Volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in)

Weight: 48 kg (106) lbs)

Machine Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in)

Layer Height: 100 um default, 40 um minimum

Ultimate Tensile Strength 700 MPa (22.6x ABS, 19.4x Onyx)

Max Flexural Stiffness: 51 GPa 924.8x ABS, 17.6x Onyx)

Infill: Closed Cell Infill: Multiple geometries available